Evolution of electrical conductivity and semiconductor to metal transition of iron oxides at extreme conditions

Iron oxides are widely found as ores in Earth's crust and are also important constituents of its interiors. Their polymorphism, composition changes, and electronic structures play essential roles in controlling the structure and geodynamic properties of the solid Earth. While all-natural occurring iron oxides are semiconductors or insulators at ambient pressure, they start to metalize under pressure. Here in this work, we review the electronic conductivity and metallization of iron oxides under high-pressure conditions found in Earth's lower mantle. We summarize that the metallization of iron oxides is generally controlled by the pressure-induced bandgap closure near the Fermi level. After metallization, they possess much higher electrical and thermal conductivity, which will facilitate the thermal convection, support a more stable and thicker D^{$\prime\prime$} layer, and formulate Earth's magnetic field, all of which will constrain the large-scale dynamos of the mantle and core.     

Novel synthesis of sensor for selective detection of Fe+3 ions under various solvents

Naked-eye colored chemo dosimeter based on vanilline based conjugated sensor was synthesized and characterized. The main point of this paper is that the solvent also affects on selectivity of metals. Vanilline based conjugate sensor exhibited high selectivity and sensitivity for detection of Ferric ions (Fe⁺³) in all (both polar and nonpolar) solvents according to absorbance which can be observed by naked eye. The selectivity was more prominent in nonpolar or less polar solvent due to solubility factor of ions and sensor but not for polar. The detection of limit of the synthesized probes was shown up to 0.84 ppm. The dielectric constant of solvents affected on the complex formation of ligand with transition metal ions. A filter paper strip system was used for rapid monitoring of detection by color variation.     

金刚石衬底上GaN HEMT沟道温度建模:各向异性且非均匀热导率的影响

为了改善GaN HEMT的自热效应,集成高热导率的金刚石衬底有助于增强器件有源区的热量耗散。然而,化学气相淀积(CVD)生长的多晶金刚石(PCD)具有柱状晶粒结构,导致了各向异性的材料热导率,且其热导率值与生长厚度有关。为此,通过建模金刚石生长过程中晶粒尺寸的演变过程,计算了金刚石沿面内和截面方向的热导率。基于该PCD热导率模型,利用计入材料非线性热导率的GaN器件热阻解析模型,计算得到了GaN HEMT沟道温度的波动范围,并分析了其与器件结构(栅长、栅宽、栅间距、衬底厚度)和功耗的依赖关系。最后,通过与有限元(FEM)仿真结果对比,分区域提取了GaN HEMT器件中PCD衬底的有效热导率,分别为260~310 W/(m·K)和1 250~1 450 W/(m·K)。本文的计算为预测金刚石衬底上GaN HEMT器件的沟道温度提供了快速、有效的方法。     

Phosphoric-Acid Retention in High-Temperature Proton-Exchange Membranes

Great efforts have been conducted to develop high temperature proton exchange membrane fuel cell (HT-PEMFC) due to its features of enhanced electrocatalyst reactivity, simplified hydrothermal management system and high CO tolerance of catalysts, and remarkable progress has been achieved. However, the easy leaching of phosphoric acid (PA) from the membranes during operation limits its commercial scale-up in complicated environments. This concept here mainly focuses on the recent developments for mitigation of PA loss in PEMs. The probable mechanisms of PA loss are proposed. The approaches to improve PA retention for example via introduction of phosphonic acid by covalent bond, using ion-pairs interaction and siphoning effect, and blending with inorganic nanoparticles are described in detail. Among these strategies, the siphoning effect from the intrinsic microporous PEMs is the most efficient and enables the cell to operate flexibly within a broad temperature range. Therefore, this concept may provide new ideas for the scientists to retain PA, to improve the cell performance and expand the potential applications of PA doped PEMs at elevated humidity and wide temperature range.     

Insights into MWCNTs/polyimide nanocomposites: from synthesis to application as free-standing flexible electrodes in low-cost micro-supercapacitors

In the pursuit to enlarge the library of polyimide materials for energy applications, new polyimide/MWCNTs composite films have been developed by MWCNTs-assisted polycondensation reaction of a hydroxyl and triphenylmethane-containing diamine with benzophenone tetracarboxylic dianhydride targeting to highlight their electrical storage capability as flexible electrodes in micro-supercapacitors (mSCs). The Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance, UV–vis, fluorescence, and Raman spectroscopies were used to demonstrate the evolution of interfacial interactions between MWCNTs and the precursors (diamine monomer and intermediate polyamidic acid) and polyimide matrix that proved to be the origin of MWCNTs homogeneous dispersion. Thus, composite films incorporating 1, 3, 5, and 10 w.t.% MWCNTs were obtained and thoroughly investigated with regard to their morphology, mechanical behavior, thermal stability, and electrical conductivity. The electrochemical performance of these composites was first analyzed in a classical three-electrode cell by cyclic voltammetry and galvanostatic charge-discharge in both aqueous and organic electrolyte systems. By far, the best electrical storage capacity was obtained with the composite polyimide film containing 10% MWCNTs that was further used as both active material and current collector in a flexible symmetric mSC realized by a straightforward and low-cost procedure. In the attempt to better exploit the advantages of this composite film, it was layered with a graphite-containing paint and tested as an electrode in a flexible mSC, which provided satisfactory results. To our knowledge, this is the first report on the electrical charge storage capability of a polyimide/MWCNTs free-standing film as a flexible electrode in mSCs, which do not require time- and resource-consuming processing steps.     

Enhanced thermal conductivity and mechanical properties of polymeric composites through formation of covalent bonds between boron nitride and rubber chains

Hexagonal boron nitride (BN) platelets, also known as white graphite, are often used to improve the thermal conductivities of polymeric matrices. Due to the poor interfacial compatibility between BN platelets and polymeric matrices, in this study, polyrhodanine (PRd) was used to modify BN platelets and prepared functionalized BN-PRd platelets, thereby enhancing the interfacial interaction between the thermal conductive filler and polymeric matrix. Then, BN-PRd platelets were dispersed into the nitrile butadiene rubber (NBR) matrix to yield high thermally conductive composites. The presence of N? C═S groups in PRd allowed the combination of PRd and NBR chains containing stable covalent bonds via vulcanization reaction. The thermal conductivity of the as-prepared 30 vol% BN-PRd/NBR composite reached 0.40 W/mK, representing an increment of 135% over pure NBR (0.17 W/mK). In addition, the largest tensile strength of NBR composite containing 30 vol% BN-PRd platelets was 880% times of pure NBR. The 30 vol% BN-PRd/NBR composite also displayed a relatively high dielectric constant (9.35 at 100 Hz) and a low dielectric loss tangent value (0.07 at 100 Hz), indicating their usefulness as dielectric flexible materials of microelectronics. In sum, the simplicity and good efficiency of formation of covalent bonds between boron nitride and rubber chains look very promising for large-scale industrial production of high thermally conductive composites.     

Emerging Trends in Fluorescence Bioimaging of Divalent Metal Cations Using Small-Molecule Indicators

Visualization of cation dynamics inside a living system represent a major breakthrough at the crossroad of chemistry and cellular physiology. Since the inception of BAPTA-based cellular calcium indicators in the 1980s, generations of chemical and genetically encoded ion indicators spanning the visible spectrum have been developed. In this article, we bring up three emerging concepts in this field: 1. red-shifting cation indicators towards far-red and near-infrared (NIR) channels; 2. directing the indicators to various subcellular localizations; 3. lowering the phototoxicity of indicators for long term recording. These initiatives collectively echo the advocate of 4D cellular physiology, where biological processes within living systems can be panoramically unveiled under 3D, long-term, and multi-channel imaging with unprecedented spatial and temporal resolution. This outlook poses exciting challenges and opportunities for chemists to upgrade the toolkit of fluorescent indicators as key enablers for a new era of imageomics.     

(Sm0.5Gd0.2Nd0.3)2(Hf0.3Ce0.7)2O7复合氧化物的热物理性能

为寻求新型热障涂层用陶瓷材料,本文采用高温固相烧结法制备了(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。利用XRD分析了其晶体结构,SEM分析其显微组织,膨胀仪测试其热膨胀性能,激光热导仪测试其热扩散系数。结果表明,成功制备了具有单一萤石晶体结构的(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。其显微组织结构致密,晶界清晰无其他相存在。由于复杂的元素组成和较大的原子量,其热导率明显低于7YSZ和Sm₂Ce₂O₇。其较低的热膨胀系数则归因于B位离子较小的离子半径,但其热膨胀系数依然满足热障涂层的要求。     

Highly sensitive perylene tetra-(alkoxycarbonyl) based colorimetric and ratiometric probes for fluorine detection

Fluoride anion (F^?) affects environmental, biological, and chemical processes significantly. Therefore, its detection has received increasing attention, and sensitive, effective, and convenient probes for F^? detection need to be developed urgently. In this work, two perylene tetra-(alkoxycarbonyl) (PTAC) based colorimetric and ratiometric probes, P1 and P2, were developed for the detection of F^?. The interactions between F^? and these two probes were investigated by absorption, electrochemistry, ¹H NMR, and density functional methods. Both the two probes were complexed with F^? with a ratio of 1:1. The detection limits of P1 and P2 were 0.22 μM and 0.87 μM, respectively. It was worth noting that the absorption peak of P1 showed a 190 nm red shift when sensing F^?, and P1 is the largest red shift value reported in F^? probes based on PTAC derivatives. This phenomenon was resulted from the unique configuration and deprotonation of P1 that can promote the intramolecular charge transfer (ICT). This strategy provides an example for the development of other ion probes based on D-A type ICT mechanism.